Help Center Home

 Billing History &
       Account Info
 

 My Password

 Update My Payment Info

 Update My Address

 Billing Questions

 Access Numbers

 Connection Issues

 Email Questions

 Get Bluelight Software

 Safety/Security

 Contact Us

 
Select a different
Operating System

How do I set up my modem if it is not in Juno's modem database? (Juno 2.0)

If your modem is not part of Juno's modem database, you will have to add it. Before you can do this, you will need to find out technical information about your modem, as well as the correct commands to use in its initialization string. To find this information out, contact your modem manufacturer (or refer to your modem manual) and ask for a string that will command your modem to use the following settings:

  • Set factory defaults
  • Hardware flow control on
  • DCD (Data Carrier Detect) set to follow line carrier
  • Disconnect on DTR (Data Terminal Ready) signal
  • Data compression off

With this information, you can add your modem to Juno.


To add your modem to Juno's modem database in Juno 2.0:

  1. Go to the Connection menu and select Modem Setup.
  2. On the Modem Setup screen, click Manual Modem Setup.
  3. Click Add New Modem.
  4. In the Add Modem Entry window, click the Modem list arrow to select a modem from that list that may be similar to your modem. If you do not see a similar modem in the list, select the Hayes Compatible modem that has the same speed as your modem.
  5. In the Modem name box, type the name of your modem or My Modem.
  6. In the Setup commands box, edit the initialization string with the technical information from your modem manufacturer or modem manual.
  7. Click OK. Your modem name will appear in the Modem list. Select it and complete the manual modem setup.

Other questions about modems:



 
NGCV